张树鹏
祝贺左家宝等同学合作论文在Microchemical Journal期刊发表
2023-1-19 20:49
阅读:1157

Flexible Electrochemical Sensor Constructed Using an Active Copper Center Instead of Unstable Molybdenum Carbide for Simultaneous Detection of Toxic Catechol and Hydroquinone


Author links open overlay panelJiabao Zuo, Yuliang Shen, Luyao Wang, Qi Yang, Zheng Cao, Haiou Song*, Zhiwen Ye, Shupeng Zhang*


ABSTRACT

A new electrochemical sensor based on a Cu-CuO@MoOx-modified polyethylene terephthalate electrode spin coated with PEDOT (Cu-CuO@MoOx-PEDOT/PET) was developed for simultaneous determination of catechol (CT) and hydroquinone (HQ). A zerovalent copper and copper(II) oxide intercalated molybdenum oxide MoOx (x = 2 or 3) hybrid nanomaterial (Cu-CuO@MoOx) by introducing active copper catalytic centers into the Mo2C@MoOx system based on unstable Mo2C, and replaced Mo2C using a simple hydrothermal method. At room temperature, the Cu-CuO@MoOx-PEDOT/PET electrode demonstrated the lowest detection limits of 0.216 and 0.221 μM for CT and HQ (S/N = 3), respectively. In addition, the applicability of this method was proven by the recovery of CT and HQ in spiked tap water samples. The Cu-CuO@MoOx-PEDOT/PET flexible electrode had strong anti-interference ability, good repeatability and long-term stability. It was used in the detection of CT and HQ in Nanjing tap water, the recoveries of CT and HQ calculated from the it curve were 99.36% and 97.56%, respectively. Most importantly, the flexible electrode could still maintain relatively stable electrochemical responses under different bending and folding conditions, and the obtained relative standard deviations (RSDs) were 2.78% and 1.53%, respectively. This flexible property holds promise for the construction of wearable electrochemical sensors.

image.png


原文链接:https://www.sciencedirect.com/science/article/abs/pii/S0026265X23000619 



转载本文请联系原作者获取授权,同时请注明本文来自张树鹏科学网博客。

链接地址:https://wap.sciencenet.cn/blog-311896-1372663.html?mobile=1

收藏

分享到:

当前推荐数:1
推荐人:
推荐到博客首页
网友评论0 条评论
确定删除指定的回复吗?
确定删除本博文吗?